Description
SoilWatch 10
The ultimate soil moisture sensor for accurate and reliable measurements. Say goodbye to inferior resistive sensors found elsewhere. Our innovative design features no exposed electrodes, eliminating corrosion issues common in other sensors. With minimal drift over time or in response to temperature changes, SoilWatch 10 delivers consistent readings regardless of voltage supply. Its waterproof and weatherproof construction allows for long-term burial in soil without compromise. Experience unparalleled durability and precision with SoilWatch 10.
Please Note: Only the sensor is included in this sale. Any additional accessories or components shown in images or descriptions are not included.
Features:
- Accurate
- Easy to use
- 75Mhz capacitive sensor
- Waterproof and weatherproof proof
- It will last a lot longer than resistive soil moisture sensors
Applications:
- Irrigation management
- Soil moisture monitoring
- IoT Devices
Specification:
Voltage: 3.1 – 5.0V (absolute maximum 5.5V)
Output: 0 – 3.0V (approximately)
Current: ~15mA
Startup time: <25ms
Operating temperature: -20°C to 80°C (readings below 0°C are meaningless)
Dimensions: 170x25x25mm
Weight: ~52g, ~120g, ~210g, ~400g
Cable: 1.5m, 5m, 10m, 20m
Connections:
- Brown – VCC (+)
- Green – VDD (-)
- White – Output
Raspberry Pi
Experience the power of SoilWatch 10 alongside your Raspberry Pi with ease, thanks to its compatibility with external analog-to-digital converters (ADC). Simply integrate popular ADC options such as ADS1115 or MCP3008 breakout boards for seamless connectivity. Unlock the full potential of your soil moisture monitoring with SoilWatch 10 and Raspberry Pi, a dynamic duo for data-driven gardening and agriculture.
Python script for use with Raspberry Pi + ADS1115
# # PINO-TECH - SoilWatch 10 # Raspberry Pi + ADS1115 # # To run this script the ADS1115 library needs to be installed # Use the command below to install the library # sudo pip3 install adafruit-circuitpython-ads1x15 # import time import board import busio import adafruit_ads1x15.ads1115 as ADS from adafruit_ads1x15.analog_in import AnalogIn i2cbus = busio.I2C(board.SCL, board.SDA) ads = ADS.ADS1115(i2cbus) # Set analog chanel ch0 = AnalogIn(ads, ADS.P0) #ch1 = AnalogIn(ads, ADS.P1) while True: #calculate the Volumetric Water Content vwc = 2.8432*ch0.voltage**3 - 9.1993*ch0.voltage**2 + 20.2553*ch0.voltage - 4.1882 #round vwc to 2 decimals vwc = round(vwc, 2) print("Voltage: ", round(ch0.voltage, 3), "%VWC: ", vwc) time.sleep(0.3)
ESPHome + Home Assistant
Connect SoilWatch 10 to your Home Assistant system using ESPHome for easy integration. Monitor soil moisture levels effortlessly and add a practical touch to your gardening setup. Enjoy the convenience of technology and nature working together seamlessly with SoilWatch 10 and Home Assistant.
Sample yaml configuration file – sensor section only
sensor: # SoilWatch 10 - Pino-Tech - Soil Moisture Sensor 1 - platform: adc pin: number: GPIO36 #change to your GPIO (GPIO36 - VP pin on ESP32 DEVKIT V1) allow_other_uses: true name: "Soil humidity" icon: "mdi:water" attenuation: 11db update_interval: 0.1s unit_of_measurement: '%VWC' filters: - calibrate_polynomial: degree: 2 datapoints: - 0.2 -> -0.48 - 0.6 -> 5.27 - 1.0 -> 9.71 - 1.4 -> 13.94 - 1.8 -> 19.04 - 2.2 -> 26.12 - 2.6 -> 36.26 - 3.0 -> 50.55 # updates sent = (update_interval * send_every) 0.1s * 100 = 10s - sliding_window_moving_average: window_size: 100 send_every: 100 send_first_at: 100
Made in POLAND!
Our sensor is being assembled and tested in-house. This allows us to have full control
over the quality of our product.
Download:
Datasheet: SoilWatch10
Arduino Examples:
Volumetric Water Content:
/* SoilWatch 10 soil moisture sensor example - VWC Reads analog value of soil moisture sensor and displays it on the serial port. The circuit: Sensor output (white wire) connect to Analog A0 on Arduino. Connect VCC (brown wire) to 3.3V or 5V on Arduino (3.3V gives more stable readings) Connect GND (green wire) to GND on Arduino. created 30 Aug. 2017 last updated 1 Jun 2021 by Piotr Trembecki https://pino-tech.eu/sw10 This example code is in the public domain. */ /* ******** SETUP ******** For 1.1V version set is1V1Output to true. The usual maxADC value will be around 1000. For 3V version set is1V1Output to false. The usual maxADC value will be around 600. *********************** */ const int analogInPin = A0; // Analog input pin that the sensor output is attached to (white wire) bool is1V1Output = false; // set true if 1.1V output sensor is used for 3V set to false float refVoltage = 5; // set reference voltage - by default Arduino supply voltage (UNO - 5V) int rawValue; float voltage, vwcValue; void setup() { // initialize serial communications at 9600 bps: Serial.begin(9600); if (is1V1Output == true) { analogReference(INTERNAL); //set ADC reference to internal 1.1V refVoltage = 1.1; } } void loop() { // read the moisture value: rawValue = analogRead(analogInPin); voltage = rawValue * refVoltage / 1023.0f; // print ADC results to the serial monitor: Serial.print("RAW ADC = " ); Serial.print(rawValue); Serial.print(", " ); // print mapped results to the serial monitor: Serial.print("Voltage = " ); Serial.print(voltage); Serial.print(", " ); if (is1V1Output == true) { //multiply the voltage to mach 3V version VWC equation of the sensor voltage = voltage * 2.94; } //VWC equation is suitable for most mineral soils - most mineral soils will saturate around 35-50% VWC vwcValue = (2.8432f * voltage * voltage * voltage) - (9.1993f * voltage * voltage) + (20.2553f * voltage) - 4.1882f; // print VWC results to the serial monitor: Serial.print("Moisture VWC [%] = " ); Serial.println(vwcValue); // wait 500 milliseconds before the next loop delay(500); }
Simple moisture example:
/* SoilWatch 10 soil moisture sensor example - Simple Reads analog value of soil moisture sensor and displays it on the serial port. The circuit: Sensor output (white wire) connect to Analog A0 on Arduino. Connect VCC (brown wire) to 3.3V or 5V on Arduino (3.3V gives more stable readings) Connect GND (green wire) to GND on Arduino. created 30 Aug. 2017 last updated 9 Feb 2018 by Piotr Trembecki https://pino-tech.eu/sw10 This example code is in the public domain. */ /* ******** SETUP ******** For 1.1V version set is1V1Output to true. The usual maxADC value will be around 1000. For 3V version set is1V1Output to false. The usual maxADC value will be around 600. *********************** */ const int analogInPin = A0; // Analog input pin that the sensor output is attached to (white wire) int minADC = 0; // replace with min ADC value read in air int maxADC = 600; // replace with max ADC value read fully submerged in water bool is1V1Output = false; // set true if 1.1V output sensor is used for 3V set to false int moistureValue, mappedValue; void setup() { // initialize serial communications at 9600 bps: Serial.begin(9600); if (is1V1Output == true) analogReference(INTERNAL); //set ADC reference to internal 1.1V } void loop() { // read the moisture value: moistureValue = analogRead(analogInPin); // print ADC results to the serial monitor: Serial.print("ADC = " ); Serial.print(moistureValue); Serial.print(", " ); mappedValue = map(moistureValue, minADC, maxADC, 0, 100); // print mapped results to the serial monitor: Serial.print("Moisture value = " ); Serial.println(mappedValue); // wait 500 milliseconds before the next loop delay(500); }
Marinus (verified owner) –
Great (after sales) service and perfect product
Santiago P. (verified owner) –
Piotr does a great support for his products, I will buy again of course!
Roel Knol (verified owner) –
This is my second order of these sensors because these are the only soil moisture sensors which are affordable and will work month after month. Highly recommended.
By the way, I ordered them not because the first ones were broken, but because I am expanding my garden system.
ETIENNE CÁRDENAS (verified owner) –
I love this product, it is usually difficult to find sensors of this type that operate uniformly on different types of soil. He fulfilled all my expectations.
Carsten P. (verified owner) –
I bought one a gear ago and it works really good and stable. So now I bought a new for a new project😊
Anonymous (verified owner) –
Dan H. (verified owner) –
I bought first 2 sensors to check it works as advertisement. It works very good: accurate, water proof and solid. Shipment is quickly. I am very satisfied with the purchase. So I buy 6 more. I bought sensors from all over the world. And PINO-TECH is the best one, both in term of quality and vendor attitude, at least for me. I will continue to buy from PINO-TECH in the future when I need more sensors.
Jozef (verified owner) –
Sivaprakash S (verified owner) –
Excellent sensor with reasonable price.
Jesper (verified owner) –
Phuong Ly (verified owner) –
SoilWatch 10 – Soil moisture sensor is good working for project me. Thank!
Anonymous (verified owner) –
stefanoelsner (verified owner) –
Awesome. Tried many, this is the only one that really works as expected.
It’s not cheap but worth every cent!
SCIE CEDRIC (verified owner) –
OK GOOD
Bert (verified owner) –
Ordering and delivery went well and the sensor works!
Matti Jääaro (verified owner) –
Only used for a few days but seems well calibrated and stable. Good build quality.